fbpx
Home/Water Care & Fun/Hot Tub Water Care
  • RESIST™ helps water to resist changes in pH, and increases the total alkalinity of hot tub water to prevent pH fluctuations. Maintain a proper Total Alkalinity (TA) level of 100 – 120 ppm Available size: 500g pH: 8.3
    Add to cart Details
  • PROTECT™ helps protect hot tub equipment and parts from etching by increasing the calcium level of hot tub water. Maintain a proper calcium hardness (CH) level of 150 – 200 ppm Available size: 500g pH: 9.5
    Add to cart Details
  • pH PLUS is effective for minor pH increases of hot tub water to prevent corrosion and eye/skin irritation and increase sanitizer efficiency. Before adjusting pH, ensure your Total Alkalinity is balanced. Maintain a proper (pH) level of 7.2 – 7.8 Available size: 600g pH: 11.0
    Add to cart Details
  • pH MINUS is effective for minor pH decreases of hot tub water to prevent scaling, cloudy water and eye/skin irritation and increases sanitizer efficiency. Before adjusting pH, ensure your Total Alkalinity is balanced. Maintain a proper (pH) level of 7.2 – 7.8 Available size: 800g pH: 2.0
    Add to cart Details
  • Beachcomber Tub Clean is a fast acting surface cleaner, used for the removal of scum line, dirt, scale, stains, grease or oil build-up on your hot tub surfaces. With its citrus based formula, Tub Clean is environmentally friendly and fully biodegradable. It is repelling water and has the ability to pick up and remove oils on contact. Available size: 500ml pH: 2.1
    Add to cart Details
  • Eliminate by Beachcomber is a stain and corrosion inhibitor liquid that is formulated to prevent staining of copper, magnesium, and iron on the surfaces of hot tubs and equipment. It is designed as a one-time-use bottle at the start of your hot tub maintenance, protecting against the potential corrosion of unwanted minerals. Its formula binds to minerals in the water, coating these minerals to keep them in solution, preventing them from adhering to hot tub equipment and fixtures. Available size: 500ml – Compatible with sanitizer systems pH: 2.0
    Add to cart Details
  • Beachcomber’s Filter Saver fits around and over the top of the Microfilter basket and floating weir. Filter Saver traps debris before it enters the microfilter or heater, and is perfect for wooded areas to catch leaves and other floating debris. It helps reduce maintenance and extend the life of the Microfilter. 5-packs included. Total Amount: 5 Packs Inside
    Add to cart Details
  • Beachcomber's Filter Soak is an environmentally friendly Ecologo® certified, one-shot, fast acting, alkaline detergent cleaner, which removes organic contaminants and improves the performance of your MICROFILTER™. For best results, Filter Soak is recommended to be used in conjunction with a Beachcomber Cleaner. Available size: 500ml
    Add to cart Details
  • COVER CARE is a concentrated, EcoLogo® certified, liquid revitalizer and UV protectant that is ideal for all types of hot tub covers, as well as vinyl products around the home, including patio furniture and vinyl on vehicles. Available size: 500ml
    Add to cart Details
  • The Pro Aqua Floating Puck Dispenser will hold sanitizer pucks, discs, and tablets. Simply unscrew the weighted cap at the bottom and fill up the centre barrel with your choice of bromine or chlorine. Then adjust the amount of sanitizer released by setting the feeder to your preferred level. Instructions are included along with a dosage chart. Works best with 1” tablets, pucks, and discs.

     
    Add to cart Details
  • Beachcomber’s Hydro Mop enhances water clarity by absorbing oils from the water surface, allowing the sparkle of your water to shine through and be seen from the surface. Its unsurpassed ability to absorb oils and contaminants improves filter performance and enhances water clarity.
    Add to cart Details
  • Beachcomber Foam Free is a rapid and reliable de-foamer designed to dissipate and suppress the suds and foam in your hot tub water. A squirt of Beachcomber Foam Free will suppress foam instantly on contact. Available size: 500ml pH: 7.25
    Add to cart Details
  • Beachcomber's PIPE CLEANSE is formulated to flush out the lines of your hot tub to dislodge accumulated biofilm and debris. Use 24 hours before draining. Remove your hot tub filter and ensure that all jets and water features are in the open position to allow circulation, then add one 500mL bottle of PIPE CLEANSE. Run the jets on high speed for 15 minutes. Allow tub to sit for 24 hours on circulation mode. Drain, wash, and wipe down surfaces. Refill and restart. Available size: 500ml pH: 7.4
    Add to cart Details
  • Beachcomber's Neutralizer completely neutralizes any active chlorine or bromine in hot tub water, making draining both safe and environmentally friendly. This concentrated sanitizer eliminator will instantly neutralize, or reduce your sanitizer level. Always, follow the directions on the label. Available size: 500ml pH: 10.25
    Add to cart Details
  • Perfect for Most Important Test Factors! Free Chlorine, Bromine, Total Chlorine, Alkalinity, pH, Total Hardness The Insta-TEST® 5 Plus pool & spa strip measures Free Chlorine 0-10 ppm, Bromine 0-20 ppm, Total Chlorine 0-10 ppm, Total Alkalinity 0-240 ppm, pH 6.2-9.0, and Total Hardness 0-800 ppm. This test strip is a dip-n-read strip with instant results. Each bottle includes 50 test strips packaged in a waterproof PopTop bottle with hinged cap. In addition, the bottle has a molded desiccant liner, which protects the strips from moisture and UV light.
    Add to cart Details
  • Looking for a simpler way to manage your hot tub water? Mineraluxe chlorine tablets paired with a floating dispenser make things easy for you. Just top up the dispenser and let it float, cleaning and purifying your water 24/7. Mineraluxe Chlorine tablets help to control bacteria and algae in your hot tub water, preventing them from becoming an unsightly problem.

    Key Information

    • Full range of water care solutions
    • Easy to use and effective products.
    • Keeps your spa comfortable and safe.

    Ideal Balancing Paramenters

    • Total Alkalinity: 100–150
    • pH: 7.2–7.8
    • Free Available Chlorine: 3.0–5.0 ppm
    Add to cart Details