-
Care Free is the industry’s gold standard in water care systems. Care Free is a 4-in-1 weekly water care system that replaces traditional water conditioners such as sequestering agents, oxidizers, biofilm disruptors and clarifiers. It is designed to use in conjunction with the Care Free Boost™ sanitizer. Available size: 900g – Compatible with Care Free Boost & chlorine sanitizers pH: 2.5 -
Eliminate by Beachcomber is a stain and corrosion inhibitor liquid that is formulated to prevent staining of copper, magnesium, and iron on the surfaces of hot tubs and equipment. It is designed as a one-time-use bottle at the start of your hot tub maintenance, protecting against the potential corrosion of unwanted minerals. Its formula binds to minerals in the water, coating these minerals to keep them in solution, preventing them from adhering to hot tub equipment and fixtures. Available size: 500ml – Compatible with sanitizer systems pH: 2.0 -
Beachcomber’s Hydro Mop enhances water clarity by absorbing oils from the water surface, allowing the sparkle of your water to shine through and be seen from the surface. Its unsurpassed ability to absorb oils and contaminants improves filter performance and enhances water clarity. -
Care Free Boost™ is a chlorine based sanitizer that controls the growth of bacteria and algae in hot tub waters and when paired with CARE FREE from the industry’s gold standard in water care systems. Add after each use or weekly as needed. Available size: 900g pH: 6.7 -
PROTECT™ helps protect hot tub equipment and parts from etching by increasing the calcium level of hot tub water. Maintain a proper calcium hardness (CH) level of 150 – 200 ppm Available size: 500g pH: 9.5 -
Perfect for Most Important Test Factors! Free Chlorine, Bromine, Total Chlorine, Alkalinity, pH, Total Hardness The Insta-TEST® 5 Plus pool & spa strip measures Free Chlorine 0-10 ppm, Bromine 0-20 ppm, Total Chlorine 0-10 ppm, Total Alkalinity 0-240 ppm, pH 6.2-9.0, and Total Hardness 0-800 ppm. This test strip is a dip-n-read strip with instant results. Each bottle includes 50 test strips packaged in a waterproof PopTop bottle with hinged cap. In addition, the bottle has a molded desiccant liner, which protects the strips from moisture and UV light. -
Soft is a universal water enhancer that creates soothing comfortable water, improves water quality, and helps stabilize pH levels. Soft is blended from natural occurring borate salts and is an excellent skin moisturizer, especially for those who suffer from dry skin conditions. Use before each use or weekly as desired. It has a fresh green apple scent. Available size: 900g pH: 7.0 -
RESIST™ helps water to resist changes in pH, and increases the total alkalinity of hot tub water to prevent pH fluctuations. Maintain a proper Total Alkalinity (TA) level of 100 – 120 ppm Available size: 500g pH: 8.3 -
pH PLUS is effective for minor pH increases of hot tub water to prevent corrosion and eye/skin irritation and increase sanitizer efficiency. Before adjusting pH, ensure your Total Alkalinity is balanced. Maintain a proper (pH) level of 7.2 – 7.8 Available size: 600g pH: 11.0 -
Beachcomber's Filter Soak is an environmentally friendly Ecologo® certified, one-shot, fast acting, alkaline detergent cleaner, which removes organic contaminants and improves the performance of your MICROFILTER™. For best results, Filter Soak is recommended to be used in conjunction with a Beachcomber Cleaner. Available size: 500ml -
Beachcomber’s Filter Saver fits around and over the top of the Microfilter basket and floating weir. Filter Saver traps debris before it enters the microfilter or heater, and is perfect for wooded areas to catch leaves and other floating debris. It helps reduce maintenance and extend the life of the Microfilter. 5-packs included. Total Amount: 5 Packs Inside -
Beachcomber's PIPE CLEANSE is formulated to flush out the lines of your hot tub to dislodge accumulated biofilm and debris. Use 24 hours before draining. Remove your hot tub filter and ensure that all jets and water features are in the open position to allow circulation, then add one 500mL bottle of PIPE CLEANSE. Run the jets on high speed for 15 minutes. Allow tub to sit for 24 hours on circulation mode. Drain, wash, and wipe down surfaces. Refill and restart. Available size: 500ml pH: 7.4 -
The Beachcomber Microfilter is a critical component to keeping your hot tub water clean and clear. Hidden out of the way in a dedicated and isolated reservoir, microfilters work silently to remove and filter out impurities from the water and protect the pumping equipment 24/7. The fabric pleating system is designed to easily filter out impurities to help keep water sparking and clear.Key Information
- 25 sqft of filtration material.
- OEM quality, specifications and fitment.
- Quick and easy installation.
Technical Specifications
- Diameter: 4 15/16"
- Length: 13 15/16"
- Top & Bottom Openings: 2 1/8"
-
Beachcomber Foam Free is a rapid and reliable de-foamer designed to dissipate and suppress the suds and foam in your hot tub water. A squirt of Beachcomber Foam Free will suppress foam instantly on contact. Available size: 500ml pH: 7.25 -
Beachcomber Pure Blue Water Clarifier is formulated to disperse cloudy water and restore its sparkle. Utilizing the principle of coagulation, Pure Blue gathers small particles of dirt, debris and other unwanted material in the hot tub water and compiles them together. Your hot tub's microfilter is then able to pick up those particles and hence restoring your water back to its usual sparkle. An effective solution to "polishing" your water and restoring that beautiful, clear colour. Available size: 1L pH: 3.75 -
Purezyme Water Clarifier is a natural microbial enzyme formulated to eliminate debris, reduce odours, and improve water clarity in your hot tub. It also effectively improves sanitizer efficiency by disrupting biofilm formation and accumulation. Purezyme Water Clarifier is a recommended component of a preventative weekly hot tub conditioning program. Available size: 1L pH: 3.75
